Dredge and Marine Components for Sale / Hire
Marine Components
Motion Compensated Gangway
Active Motion / Heave Compensated Gangways
Available 2 models in 2 configurations. Price: Inquire
| General | |
| Certification: | DNV GL |
| Gangway length: | |
| Standard | 19m +/- 4m |
| Extended | 23m +/- 4m |
| Allowable luffing angles: | |
| Personnel transfer | -18° to +18° |
| Cargo transfer | -23° to +35° |
| Wind speed: | 20 m/s |
| Model 1 | |
| Wave height: | Hs = 0 – 3.0m |
| Footprint: | Ø 1.5m pedestal |
| Weight: | 22 tons |
| Model 2 | |
| Wave height: | Hs = 0 – 4.5m |
| Footprint: | 5.3m x 2.8m |
| Weight: | 80 tons |
| Integrated lifting winch | |
| Lifting capacity (SWL): | 1.000 kg |
A-Frame: AXTech - 250 ton SWL
A-Frame: AXTech, SWL 250t (double fall), 200t (single fall), phi= 1,3
Including: Certificates, Approved drawings, Manuals, Spare parts, Load charts, etc. Condition: very good. Price: Inquire
| Overall Dimensions A-frame | |
| Pivot points C-C distance | 12.5 m |
| Overall width | 18.0 m |
| Total height | 22.0 m (vertical, over deck) |
| Free height (light opening) | 19.2 m (vertical, over deck) |
| A-frame lifting height | 16.6 m (vertical, over deck) |
| Estimated Weight | |
| A-frame, w/o cylinders/found. brackets | Approx. 135 T (dry, max.) |
| Deck foundation brackets | Approx. 15T each (2 off) |
| 2 off Main Cylinders | Approx. 30 T (dry, max.) |
| COG location | |
| A-frame vertically positioned over the deck | |
| X (transverse) | = approx. 0.2 m (from CL) |
| Y (along ship) | = approx. 0, 1 m (from hinge pivot to stern) |
| Z (vertical) | = approx. 15 m (above A-frame’s pivot point) |
Offshore crane: TTS Nordlift - 50 ton SWL
Offshore crane: TTS Norlift, SWL 50 t
Including: Certificates, Approved drawings, Manuals, Spare parts, Load charts, etc. Price: Inquire
Details to follow shortly
Built: 2000
Offshore crane: TTS - 35 ton SWL
Offshore crane: TTS, SWL 35 t
Including: Certificates, Approved drawings, Manuals, Spare parts, Load charts, etc. Price: Inquire
| Built: 2007 | |
| 1. General service in harbour conditions | |
| 2. General services internally on deck in offshore conditions | |
| 3. Personnel / basket handling according to API 2c | |
| Design rules: DNV for cargo handling (2008) / API for personnel handling | |
| Duty factor: | 1,05 |
| Dynamic factor: | 1,3 |
| Hazardous area: | no |
| Crane weight: | 70 ton |
| Pedestal weight: | 22 ton |
| Pedestal height: | 10 m |
| Pedestal diameter: | 2.840 mm |
| Ship power supply: | main – 440v – 60hz / aux. – 3 x 220v – 60hz |
| Power consumption / | 1. Type: marine type |
| Motor data: | 2. Duty class: S1 – 100% |
| 3. Rating: 184 kW | |
| 4. Enclosure: IP55 | |
| 5. Insulation class: F | |
| 6. Type starter: star / delta | |
| Crane control: This knuckle boom crane for sale is controlled by a portable remote control box, equipped with joysticks, display showing actual hook-load, actual outreach and allowable load at the actual outreach, start/stop buttons, emergency stop button, pilot light for common alarm, selector switches for the 3 different lifting conditions and for selecting hoisting on one, two or three wire-rope parts. The remote control box may be plugged into a socket at the open control platform on the side of the crane house, or alternatively into a socket on the pedestal at the deck level. | |
Knuckle Boom Crane: GCC - 25 ton SWL
Knuckle Boom crane: GCC, SWL 25 t
Including: Certificates, Approved drawings, Manuals, Spare parts, Load charts, etc. Price: Inquire
| 25 t SWL knuckle boom crane | |
| Removed from vessel in good working condition | |
| Built: | 2008 |
| Maximum outreach: | 20 m |
| Minimum reach: | 4.6 m |
| Capacity at max. outreach: | 5 ton (dynamic & static) |
| Capacity at min. outreach: | 25 ton (dynamic & static) |
| Maximum hook travel: | 90 m |
| Main hook speed: | 24 m / min. |
| Single line pull: | 27 ton. |
| Slew speed: | 0 – 1.0 rpm |
| Slewing rotation: | 360 degrees |
| Hydraulic power unit: | included, two (2) 125 hp / 480v ac electric motor |
| Hydraulic tank capacity: | 4.5 m3 |
| Full documentation available | |
| Delivery: | ex-site the Netherlands |
| Availability: | Immediate, upon payment in full |
Hydr. Hammers
For Charter / Hire
| Type | Weight (t) | Length (m) | Oil-flow (l/min) |
| S500 | 57.5 | 11,943 | 1600 |
| S280 | 30.5 | 10,390 | 800 |
| S150 | 16.2 | 8,166 | 460 |
| S90 | 9.7 | 8,055 | 250 |
| IHC S-500 | |
| The IHC hydraulic underwater hammer is a universal pile-driving tool for use in air and under water. The hammer generates an energy level of up to 500 kNm. One advantage of this hammer is that the energy applied per blow can be continuously adjusted form 5 – 100% during pile driving. The hammer has been used for a variety of template and platform piles in water-depths to 285m. | |
| General | |
| Type | IHC S500 Hydro hammer |
| Operating Data | |
| Max. pile energy/blow* | 500 kNm |
| Min. pile energy/blow* | 25 kNm |
| Blow rate (max. energy) | 50 bl/min |
| *) measured in pile | |
| Weights | |
| Ram | 25 mt |
| Hammer (in air) | 56 mt |
| Flat bottom anvil | 9 mt |
| Pile sleeve excluding ballast | 15 mt |
| Pile sleeve including ballast | 25 mt |
| Total weight in air** | 90 mt |
| Total weight under water** | 74 mt |
| **) incl. sleeve and ballast | |
| Hydraulic Data | |
| Operating pressure | 300 bar |
| Maximum pressure | 350 bar |
| Maximum oil flow | 1400 L/min |
| Hydraulic supply hose ID (two) | 2 inch |
| Hydraulic return hose ID (two) | 2 inch |
| 72 In hammer sleeve | |
| ID | 1860 mm |
| Maximum OD | 3500 mm |
| Length | 3970 mm |
| 84 In hammer sleeve | |
| ID | 2160 mm |
| Maximum OD | 3900 mm |
| Length | 3300 mm |
Reintjes Gearbox, WAF 1173
Two (2) x Reintjes Gears Model WAF 1173 7.429 to 1 ratio
Please contact us for more details
Twin Disc, MGN 1727
Four (4) x Twin Disc Model MGN 1727 Gears 7.12 to 1 ratio
Contact us for more details.
Gate Valves
New Gate valves 900
Workingpressure: 6 bar
Testpressure: 10 bar
Hydraulically operated
Price: Inquire
New Gate valves 900
Workingpressure: 12 bar
Testpressure: 18 bar
Hydraulically operated
Price: Inquire
Various
| For all equipment specifications can be provided on request | |
| Equipment will be supplied with manuals and drawings in sofar appropriate and available | |
| Equipment | Quantity |
| Two-stroke engine: Bolnes 18 VDNL 190/600 | 1 |
| Two-stroke engine: Bolnes 16 VDNL 190/600 | 1 |
| Woodward governor type: 3161 | 2 |
| BBC Turbo charge type: VTR 304-11 | 2 |
| Kracht Fuel Booster pump type: KF4-150 | 2 |
| Nijhuis C.W, Pump Type: DKP1-80200 80m3/ hr. 2 bar. | 2 |
| Bolnes Lubrication Oil Pump type? 40m3/ hr. 5 bar. | 2 |
| Bloksma Cooling Water Cooler type: 270LZ | 2 |
| Bloksma Lubrication Oil Cooler type: 320LZ | 2 |
| Amot C.W. thermostat valve type 5B | 4 |
| Amot Lub.Oil. thermostat valve type 38F | 2 |
| Main Generator Jeumont Schneider 2200Kw/1000rpm | 1 |
| U.W.P. motor 1100Kw/1000rpm | 1 |
| Cutter Motor Jeumont Schneider 717Kw/1000rpm | 1 |
| Dredge Pump Gearbox Tacke NHU1-560 2235Kw 600/235rpm | 1 |
| UWP Gearbox Tacke NHU1-560 1100Kw 1000/235-306rpm | 1 |
| Generator Gearbox Tacke NH1-450 2200Kw 600/1000rpm | 1 |
| Gearbox Hydraulic drive Stork 3R320 spec 3 600rpm | 1 |
| Cutter Gearbox Tacke SK III-950 715Kw 1000/50rpm | 1 |
| Curved Tooth coupling Tacke LBLK 225 | 1 |
| Curved Tooth coupling Tacke SBK 375 SP | 1 |
| Curved Tooth coupling Tacke SBLK 160 | 1 |
| Curved Tooth coupling Tacke SBLK 200 | 1 |
| Safe Set Tacke STB 130 | 1 |
| Coupling for Cutterdrive Flender KPPLG-ZAPEX ZZW 780 SO | 1 |
| Flexible Clutch Coupling Vulkan MESLU 89 & RATO-S 3022-253 | 1 |
| Flexible Coupling Vulkan RATO S | 1 |
| IHC Double Walled dredge Pump 1900-400-800 | 1 |
| Jet Pump Nijhuis HGT 1-250500 | 1 |
| Gland Pump Nijhuis NC1-50230 | 3 |
| Flushing Pump Nijhuis NC1-50180 | 2 |
| Gland Pump Nijhuis NC1-65340 | 3 |
| Cooling Water Pump Nijhuis NC1-80280 | 1 |
| Lub. Oil Pump Kracht KF 1/20 B1 | 1 |
| Lub. Oil Pump Kracht KF 1/16 B1 | 1 |
| Lub. Oil Pump Kracht KF 2/50 B1 | 1 |
| Lub. Oil Pump Kracht KF 5/250 T1 | 1 |
| Lub.Oil Cooler Bloksma 170 | 1 |
| Starting Air Compressor Atlas Copco LT15-30KE | 2 |
| Working Air Compressor Ingersoll Rand 30T | 1 |
| Air Dryer Ingersoll Rand TMS | 1 |
| Hydrophore Water Pump Speck WB 10 | 1 |
| Sludge Pump Speck BS 50 | 1 |
| Oil Water Seperator Aqua Marine GEDE 500 MK II | 1 |
| Fuel Oil Seperator Westfalia OSA 7-02-066 Vesa 1 Contr Unit | 1 |
| Spud Hoisting Cylnder | 2 |
| Spud Carrier Cylinder | 1 |
| Hydraulic Filter Unit | 1 |
| Hydraulic Emergency Pump Unit | 1 |
| Delta Flipper 3.5 Ton | 3 |
| Cutters | 2 |
| Search Light | 1 |
| Impellers | 3 |
| Pump Covers | 2 |
| Ball Joint male and female | 1 |
| Generator Jeumont Schneider 380V 2200Kw 3000KVA 1000rpm | 1 |
| E-Motor Cutter Jeumont Schneider 552Kw 1000RPM 750V | 1 |
| E-Motor UWP Jeumont Schneider 1100Kw 1000RPM 660V | 1 |
| Transformers Several | |
Details & Price: Inquire
On this page you will find an array of Dredge and Marine Components :
- Marine components like thusters, all types of marine and offshore cranes, gantries, A-frames, caroussels
- Mechanical compents like, engines, gearboxes,
- Dredge components such as dredge pumps, booster pumps, cutter heads, dragheads, grabs, gate vales, anchors, spuds, turning glands. in short all wearing parts on board a dredger.
To find out more about Dredge and Marine components, please contact us.
